Grouting equipment

Peristaltic hose pump series is a new type of multi-function and multi-function industrial pump developed by absorbing advanced technology. The pump has no seal, no leakage, strong self-priming ability, simple structure and convenient operation and maintenance. Peristaltic pump is suitable for conveying a variety of abrasive fluid materials, viscosity, density, corrosive. It can be used in petroleum, medicine, papermaking, ceramics, chemical, water treatment, mining, gold smelting and other industries. Gaodetec have been engaged in the design and production of GH construction used peristaltic pumps for many years. Today  peristaltic pumps have become very mature products, with various standard models and many special models, our engineers designed these models according to requirements of our customers. According to your requirements, we can design special construction peristaltic hose pump in terms of output, working pressure, connection type, etc. Construction used peristaltic p

As a professional automatic grouting plant supplier, Gaodetec has produced grouting pump, grouting pump station, grouting mixer and other related grouting equipment, and has been widely praised by customers. The related grouting plant has electric and diesel engine for choosing, we can also customize the grouting plant according your request. The automatic grout plan t integrates the grouting mixer, grouting agitator and grouting pump. The automatic grouting plant for sale is mainly used in the construction of over ground and underground works such as highway, railway, hydropower, construction and mine. The grouting mixer machine eddy current pulping, pulping fast, uniform, water, cement and other media can be quickly mixed into a uniform slurry; Then the mixed slurry is transferred to the mixing tank. The grouting pump draws the slurry from the mixing tank (the storage tank) to achieve continuous pulping and grout operations. The automatic grouting plant for sale is GBP 1000/1600/20

First: Preparation before grouting: 1. Check whether the power supply of the grouting pump is normal. 2. Check the motor and gear oil pump, and rotate it several times. 3. Turn on the pressure gauge switch and release the pressure regulating handwheel of the overflow valve.  3. Check whether the steering direction of the motor and gear oil pump is correct. 6. Check whether the hydraulic reversing valve block can control the reciprocating movement of the cylinder. 4. Start the motor, adjust the system pressure to 1~2Mpa, test run for about 5 minutes (at this time the mixer slurry valve is fully opened), if it runs normally, close the valve on the mixer and adjust the oil pressure to the required level The maximum pressure, then stop the grouting pump and prepare for formal work. 5. Put the suction pipe into clean water for test machine use. Second: Formal grouting operation: 1. Open the grouting valve of the mixer and inject water for 1 minute. 2. If everything is normal, the two sucti