Continuous grout mixer for drill
Continuous grout mixer for drill also used in the construction of hydropower, railroads, highways, construction, mining and other industries. You can quickly mix grout or squeezer, cement, and water into the slurry. Compared to general grout mixers, grout mixers for drill is characterized by high pulping efficiency, easy operation, uniform slurry, and short-distance transport function.
When the continuous grout mixer for drill is activated, cement and water are proportionally added to the pulping cylinder, the materials in the cylinder are mixed at high speed and evenly by the action of the pulping pump, and the prepared slurry is mixed through the valve. Storage cylinder. Stirring paddles are attached to the storage barrel to prevent the slurry from settling.
Functions of the continuous grout mixer for drill:
1. High efficiency and large reserves applicable to various grout injections
When the continuous grout mixer for drill is activated, cement and water are proportionally added to the pulping cylinder, the materials in the cylinder are mixed at high speed and evenly by the action of the pulping pump, and the prepared slurry is mixed through the valve. Storage cylinder. Stirring paddles are attached to the storage barrel to prevent the slurry from settling.
Functions of the continuous grout mixer for drill:
1. High efficiency and large reserves applicable to various grout injections
2. Engineering operation.
3. Safe and reliable; the key component motor has a high level of protection.
The mixing arm of the storage tank adopts a frame modification structure with high strength, strong force and no deformation.
Safe operating procedure for continuous grout mixer for drill:
(1) It is necessary to select an appropriate distributed disk and mixing head according to the work requirements. To replace a distributed disc or mixing head: First loosen the nut at the bottom of the distributed disc with a wrench, remove the distributed disc to be replaced, and then replace it with a new disc. The upper distributed disc is screwed into the drive shaft.
(2) After turning on the power, turn on the power switch, turn the speed control knob of the motor to the right to start rotation slowly, and turn the motor to the left to decelerate slowly. If the rotation speed is high, the stirring rod will shake slightly, but it will not affect the use under normal conditions. Note: The mixing head of this machine is strictly prohibited from leaving the material unattended.
(3) After finishing the work, return the governor to 0, turn off the power switch, turn off the power, and unplug it.
(4) After use, the grout mixer machine for drill must be cleaned in time.
When cleaning continuous grout mixer for drill, the residual cement slurry should be thoroughly cleaned to prevent residual agglomeration that can cause equipment failure during the next use. After cleaning the grout mixer for the drill, add grease to the grease holes to extend the useful life of the internal seal of the transmission assembly.
If you are interested in the continuous grout mixer for drill, please contact us. Email: info@gaodetec.com
3. Safe and reliable; the key component motor has a high level of protection.
The mixing arm of the storage tank adopts a frame modification structure with high strength, strong force and no deformation.
Safe operating procedure for continuous grout mixer for drill:
(1) It is necessary to select an appropriate distributed disk and mixing head according to the work requirements. To replace a distributed disc or mixing head: First loosen the nut at the bottom of the distributed disc with a wrench, remove the distributed disc to be replaced, and then replace it with a new disc. The upper distributed disc is screwed into the drive shaft.
(2) After turning on the power, turn on the power switch, turn the speed control knob of the motor to the right to start rotation slowly, and turn the motor to the left to decelerate slowly. If the rotation speed is high, the stirring rod will shake slightly, but it will not affect the use under normal conditions. Note: The mixing head of this machine is strictly prohibited from leaving the material unattended.
(3) After finishing the work, return the governor to 0, turn off the power switch, turn off the power, and unplug it.
(4) After use, the grout mixer machine for drill must be cleaned in time.
When cleaning continuous grout mixer for drill, the residual cement slurry should be thoroughly cleaned to prevent residual agglomeration that can cause equipment failure during the next use. After cleaning the grout mixer for the drill, add grease to the grease holes to extend the useful life of the internal seal of the transmission assembly.
If you are interested in the continuous grout mixer for drill, please contact us. Email: info@gaodetec.com
评论
发表评论