Positive displacement grout pump in Vietnam
Positive
displacement pumps are some of the most common in the industry. When enough
pressure is built up in the chamber, the pump moves the liquid out and into the
discharge system. Piston pump, it is one of the best known positive
displacement pumps, it is used to move liquids and compress gas. Plunger pumps,
it is similar to a piston pump, it is used where high pressure is needed.
Positive
displacement grout pump produced by us, it is a grout mixer agitator pump. High
shear high speed colloidal grout mixer, fast mixing the water, cement,
bentonite, and additives. And evenly mixing the above material, also takes less
time. The agitator slow mixing the material. And so no air inside the material,
also no settle down. Positive displacement grout pump Vietnam is a single
piston grout pump. Full hydraulic grouting pump, more reliable during the
working. Operator controls are centrally located for efficient production.
https://www.leadcrete.com/grout-pump-mixer/electric-grout-station.html
Positive
displacement grout pump Vietnam, it is widely used in soil nails grouting,
foundation stabilization grouting, soil compaction grouting, micro-tunneling
grouting, tunnel lining grouting and injection. Could be also used in other
civil engineering groutings etc. Injection and grouting projects.
The
Positive displacement grout pump in Vietnam, mixer capacity is 300L, agitator
volume is also 300L. Pump flow and pressure have low speed and high speed.
0-75L/min,0-50Bar (high speed); 0-38L/min ,0-100bar (low speed). The maximum
batch size can be calculated to 90% of the container volume. Usually, water
cement ratio is more than 0.5:1. And based on special design, could lower to
0.32.
https://www.leadcrete.com/grout-pump-mixer/electric-grout-station.html
The
grout pump flow and pressure capacity are sufficient to perform a satisfying
grout operation. The grout pressure is one of the main of the three major
factors for the penetration distance. The other two factors are grout mixer and
the effective fissure aperture. If the flow speed is too low, the separation
will start early and the cement settle and clumps of the cement start to grow.
So during the pre-grouting works, the pressure is very important. The grouting
result depends on flow and pressure, so it should be always be possible to
adjust the grout pressure and grout flow during the grouting projects.
https://www.leadcrete.com/grout-pump-mixer/electric-grout-station.html
The
positive displacement grout pump produced by us, it could adjust the flow and
pressure. Full hydraulic type pump, it is better during the working than the
mechanical type grout pump.
Leadcrete
produces a variety grouting equipment, including grout mixer and agitator,
grout pump and grout plant station. All the above machine could be customized
according to your projects request, including the capacity, flow, pressure and
the power. If you want to know more information about positive displacement
grout pump in Vietnam, please email us: sales@leadcrete.com
评论
发表评论