Grout injection plant for Dam

 Grout injection plant is a combination of grout mixer, grout agitator, grout pump and the hydraulic power pack system. Lead Equipment designs, constructs and produce the cost-effective build grouting solutions for the construction sector. Grout injection plant are widely used in following project:

  Grouting for dam: usually we use curtains grout method.

  Ground improvement, usually the projects are done by compaction grouting method

  Soil stabilization projects, such as with sheet piling, excavations in water-bearing soils etc.

  Curtain grouting of rock fissures and voids in underground tunnels.

  Grouting can extend the life of existing structures that have experienced severe degradation due to scour or freeze/thaw damage. Usually for dam grouting projects, cement, microfine cement, fly ash and admixes will be used. Dam grouting can be performed from the bottom up, we call this upstage grouting, or from the top down, we call this downstage grouting. Before doing the dam grouting projects, we need to know the dam condition, and doing the grouting experience, water cement ratio, grouting material output etc., so we could able to find the most suitable grouting results.

  When choosing the grout injection plant for Dam, it shall be capable of supplying, mixing, stirring and pumping the grout and additives. The plant shall have a minimum capacity of 100L/min grout injected at a pressure not greater than 50bar. The amount of grouting equipment shall be as necessary to perform the work specified herein.

  We provide cement grouting plant for rock and soil grouting applications, as well as for dam, tunneling etc. Different cement grout station are used to accommodate various site conditions and the capability of available grouting equipment. The grouting injection plant for dam is a mature products, and the quality and reliability are well trusted. If you want to know more information about grout injection plant for Dam, please email is: info@gaodetec.com