Grout mixer with agitator for sale in Malaysia
Grout mixer with agitator for sale in Malaysia is primarily driven by electric motors. The pulp is sucked into the vortex from below and sprayed from the top of the barrel to create a fast flow of liquid, creating a strong vortex inside the barrel that completely and evenly stirs the dry powder and water. To achieve lower water adhesive preparation than slurries. Compared to grout mixer with agitator for sale on the market,grout mixer with agitator for sale in Malaysia is characterized by faster pulping rates and more uniform slurry mixing. It is one of the important facilities of a large-scale pulping station.
The grout mixer with agitator for sale in Malaysia is mainly used to mix and prepare slurries that need to be strongly mixed in advance, such as cement slurries. The grout mixer with agitator for sale is used in grout equipment for pressure grout construction such as rail and road construction, mining, hydropower engineering, insulation, waterproofing, grout of building foundations.
Benefits of grout mixer with agitator for sale in Malaysia:
1. Highly efficient and large reserves that can be applied to various grout injection engineering operations.
2. Safe and reliable; the key component motor has a high level of protection.
3. The mixing arm of the storage tank adopts high strength, strong force, deformation-free, pre-denaturation frame structure.
4. High speed centrifugal mixing guarantees uniform mixing and no precipitation occurs.
5. High reliability; the motor is installed vertically, easy to seal, the sealing effect is high, the failure rate is low, and if there is a small amount of slurry leak in the stirring shaft of the motor, it will affect the production and use in a relatively short period of time. I will not give it.
Precautions for using grout mixer with agitator for sale in Malaysia:
1. Make sure the mixing impeller is steered correctly so that the slurry pipe does not leak.
2. Add an appropriate amount of water, turn on the device to clean and moisten the pulping barrel and pipeline, and after cleaning, drain the water to the pulping machine.
3. Add a certain amount of water to the machine. (Close the main valve on the front of the hopper before starting the machine to stop adding water to the bucket, but do not turn off the main water supply. It can be adjusted properly. With the cooling of the transmission. Cleaning must be done for the unit being pulped, otherwise the drive assembly will burn out) Turn on the pulper, add the powder material evenly in the specified order, control the supply time, everything After the powder material is added, continue stirring for 3-5 minutes.
4. Transport the prepared slurry to the slurry storage tank to maintain dynamic slurry storage.
5. As soon as pulping is complete, clean the equipment and pipeline, turn on the pulper and circulate and remove the cement slurry remaining in the pulper and pipeline.
If you are interested in the grout mixer with agitator for sale in Malaysia, please contact us! Email: info: gaodetec.com! We can also provide customized services.
The grout mixer with agitator for sale in Malaysia is mainly used to mix and prepare slurries that need to be strongly mixed in advance, such as cement slurries. The grout mixer with agitator for sale is used in grout equipment for pressure grout construction such as rail and road construction, mining, hydropower engineering, insulation, waterproofing, grout of building foundations.
Benefits of grout mixer with agitator for sale in Malaysia:
1. Highly efficient and large reserves that can be applied to various grout injection engineering operations.
2. Safe and reliable; the key component motor has a high level of protection.
3. The mixing arm of the storage tank adopts high strength, strong force, deformation-free, pre-denaturation frame structure.
4. High speed centrifugal mixing guarantees uniform mixing and no precipitation occurs.
5. High reliability; the motor is installed vertically, easy to seal, the sealing effect is high, the failure rate is low, and if there is a small amount of slurry leak in the stirring shaft of the motor, it will affect the production and use in a relatively short period of time. I will not give it.
Precautions for using grout mixer with agitator for sale in Malaysia:
1. Make sure the mixing impeller is steered correctly so that the slurry pipe does not leak.
2. Add an appropriate amount of water, turn on the device to clean and moisten the pulping barrel and pipeline, and after cleaning, drain the water to the pulping machine.
3. Add a certain amount of water to the machine. (Close the main valve on the front of the hopper before starting the machine to stop adding water to the bucket, but do not turn off the main water supply. It can be adjusted properly. With the cooling of the transmission. Cleaning must be done for the unit being pulped, otherwise the drive assembly will burn out) Turn on the pulper, add the powder material evenly in the specified order, control the supply time, everything After the powder material is added, continue stirring for 3-5 minutes.
4. Transport the prepared slurry to the slurry storage tank to maintain dynamic slurry storage.
5. As soon as pulping is complete, clean the equipment and pipeline, turn on the pulper and circulate and remove the cement slurry remaining in the pulper and pipeline.
If you are interested in the grout mixer with agitator for sale in Malaysia, please contact us! Email: info: gaodetec.com! We can also provide customized services.
评论
发表评论