Grout cement mixer for bentonite cement slurry mix
Grout cement mixer for bentonite cement slurry mix are primarily driven by electric motors. The pulp is sucked into the vortex from below and sprayed from the top of the barrel to create a fast flow of liquid, creating a strong vortex inside the barrel that completely and evenly stirs the dry powder and water. To achieve lower water adhesive preparation than slurries. Compared to popular colloidal grout mixers on the market, grout cement mixer for bentonite cement are characterized by faster pulping rates and more uniform slurry mixing. This is one of the key equipment in a large pulping station.
Grout cement mixer for bentonite cement slurry mix are mainly used to mix and prepare slurries that need to be strongly mixed in advance, such as cement slurries. It is used in grout equipment for pressure grout construction such as rail and road construction, mining, hydropower engineering, insulation, waterproofing, grout of building foundations.
Benefits of grout mixer for bentonite cement slurry mix :
1. Highly efficient and large reserves that can be applied to various grout injection engineering operations.
2. Safe and reliable; the key component motor has a high level of protection.
3. The mixing arm of the storage tank adopts high strength, strong force, deformation-free, pre-denaturation frame structure.
4. High speed centrifugal mixing guarantees uniform mixing and no precipitation occurs.
5. High reliability; The motor adopts vertical installation, easy sealing, good sealing effect, low failure rate, and if there is a small amount of slurry leak in the stirring shaft of the motor, it can be produced in a relatively short period of time. Does not affect usage. 
Precautions for using grout mixer for bentonite cement slurry mix :
1. Make sure the steering of the mixing impeller is correct so that the slurry pipe does not leak.
2. Add an appropriate amount of water, turn on the equipment to clean and moisten the pulping barrel and pipeline, and after cleaning, drain the water to the pulping machine.
3. Add a certain amount of water to the machine. (Close the main valve on the front of the hopper before starting the machine to stop adding water to the bucket, but do not turn off the main water supply. It can be adjusted properly.
4. Transport the prepared slurry to the slurry storage tank to maintain dynamic slurry storage.
5. Clean the equipment and pipeline as soon as pulping is complete and turn on the pulping machine to allow the cement slurry remaining in the pulping machine and pipeline to circulate and be removed.
If you are interested in grout cement mixer for bentonite cement slurry mix , please contact us! Email: info@gaodetec.com! We can also provide customized services.
Grout cement mixer for bentonite cement slurry mix are mainly used to mix and prepare slurries that need to be strongly mixed in advance, such as cement slurries. It is used in grout equipment for pressure grout construction such as rail and road construction, mining, hydropower engineering, insulation, waterproofing, grout of building foundations.
Benefits of grout mixer for bentonite cement slurry mix :
1. Highly efficient and large reserves that can be applied to various grout injection engineering operations.
2. Safe and reliable; the key component motor has a high level of protection.
3. The mixing arm of the storage tank adopts high strength, strong force, deformation-free, pre-denaturation frame structure.
4. High speed centrifugal mixing guarantees uniform mixing and no precipitation occurs.
5. High reliability; The motor adopts vertical installation, easy sealing, good sealing effect, low failure rate, and if there is a small amount of slurry leak in the stirring shaft of the motor, it can be produced in a relatively short period of time. Does not affect usage.
Precautions for using grout mixer for bentonite cement slurry mix :
1. Make sure the steering of the mixing impeller is correct so that the slurry pipe does not leak.
2. Add an appropriate amount of water, turn on the equipment to clean and moisten the pulping barrel and pipeline, and after cleaning, drain the water to the pulping machine.
3. Add a certain amount of water to the machine. (Close the main valve on the front of the hopper before starting the machine to stop adding water to the bucket, but do not turn off the main water supply. It can be adjusted properly.
4. Transport the prepared slurry to the slurry storage tank to maintain dynamic slurry storage.
5. Clean the equipment and pipeline as soon as pulping is complete and turn on the pulping machine to allow the cement slurry remaining in the pulping machine and pipeline to circulate and be removed.
If you are interested in grout cement mixer for bentonite cement slurry mix , please contact us! Email: info@gaodetec.com! We can also provide customized services.
评论
发表评论